Specification
Model: TX-JSQ-02 Vertical Divergence: ＞10°
Power supply: CT take power Horizontal Out-put: 360°
Power frequency: 50～60HZ Overall Size: 300mm×300mm×386mm
Average power: ≤2.6W×2 Working mode: Steady light
Emitted color: Red Ambient Temperature: -40℃～+55℃
Weight: 2kg (not include power taking coil) Light source: LED
Ball Body material: Marine grade plastics Wind load: 240km/h
Light emitting mirror material:Optical PC Lifespan: ≥200000h
Protection grade: IP65 Surge protection rating: 3KA
Adapting wire specification: 10mm²～38mm² Line current range: 25A～600A
Reflection coefficient: 0.3～0.7 Optional color of ball: Red, orange, white, red white, orange white.
Radiation: Can be exposed to solar radiation Relative humidity: 0％～95％
Salt spray: Can be exposed to salt spray Seismic resistance: 10～500Hz,2G 10min/cycle,XYZ 60 minutes for each axis
Altitude: ≥5500m Effective intensity: night ＞32.5cd
Photocell ambient brightness: 50/100Lux Mean Time: Between Failure ≥200000h,MIL-HDBK-217F(25℃)
EMC standards: Emitted:EN55022(CISPR 22) class A harmonic, wave:EN61000-3-2,-3
Features
- The ball is injection molded with high strength Marine grade material.
- The use of multiple groups of high-power patch LED chips, with high brightness, low energy consumption, long life and other characteristics, even if damaged one group of LED chips will not affect its work.
- Independently developed patented CT power taking device, the circuit anti-impact ability, anti-lightning ability is strong, high stability.
- With surge protection device, can be applied to harsh working environment.
- It has impact resistance, lightning protection, sun resistance, rain and snow resistance, and can resist the invasion of severe weather such as typhoon and hail.
- Can customize GPS, Beidou remote positioning and remote monitoring functions.
- One or two sets of CT power taking devices can be freely select according to the actual line current.
- Industrial working temperature -40℃ ~ +55℃.
Attention / Usage Tips
1.
When installing the device, power off the line to avoid personal injury.
2. After the installation, check that the device is correctly installed and the screws are tightly fastened.
3. Non-professional personnel should not repair the equipment to avoid expanding the fault and causing life injury;
4. Product storage Precautions Strictly comply with the provisions.
5. Do not install with power on.
Application
Various power towers and transmission lines
Dimension drawing
